Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
The advantaage of using the gateway is this enable the possibility to connect both with the CoDeSys workbench and at the same time with e.g. the OPC server, because the gateway handles the data communication from several "clients" with the PLC.
The ARTI has the advantage that you have direct access to the PLC and don't need to start up the gateway.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm new to CoDeSys...
What's the advantges of using a gateway connection or an ARTI connection?
Do either have limitations (other than OS / connection type)?
The advantaage of using the gateway is this enable the possibility to connect both with the CoDeSys workbench and at the same time with e.g. the OPC server, because the gateway handles the data communication from several "clients" with the PLC.
The ARTI has the advantage that you have direct access to the PLC and don't need to start up the gateway.