Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

CODESYS v3.5 PFC200 UPDATE

Damian7546
2019-09-08
2019-09-11
  • Damian7546 - 2019-09-08

    Hi,

    When I try UPDATE PFC200 runtime in codesys I get error:

    [INFORMATION] Executing SSH command on e root@192.168.1.100 e : Stop runtime
    [INFORMATION] Executing SSH command on e root@192.168.1.100 e : Package: store existing cfg file
    [INFORMATION] Executing SSH command on e root@192.168.1.100 e : Package: remove old
    [INFORMATION] Executing SCP command on e root@192.168.1.100 e : Package: transfer new runtime
    [INFORMATION] Executing SSH command on e root@192.168.1.100 e : Package: install new runtime
    **[ERROR] Error output: tar: Removing leading `/' from member names **
    [INFORMATION] Standard output: Installing codesyscontrol (3.5.15.0) to root... create backup of wbm Installing codesyscontrol (3.5.15.0) to root... Installing codesyscontrol (3.5.15.0) to root... Configuring codesyscontrol Backup licenses Starting plc /root
    Successfully terminated.

    What can be wrong with my runtime update on PFC200 ?

    IMG: tt.jpg

     
  • eschwellinger

    eschwellinger - 2019-09-08

    Hi,

    I would check this:
    l viewtopic.php?f=24&t=9950#p25145 l

    maybe there is no space left on your device ( if multible CODESYS runtime version applied?)
    check by ssh login and
    df

    BR
    Edwin

     
  • Damian7546 - 2019-09-09

    It is may df command result:

    IMG: df.jpg

     
  • Damian7546 - 2019-09-09

    When I restore FW to default wersion the home webpage is WAGO. When I run my Codesys v3.5 and choose UPDATE PFC200 it is installed and above error but it is works...I'm only worried about this error, because I try for several days run SMS service and it doesnt work.

    Do you know what can be wrong ?
    I bought codesys sms service library, I run example project (only change target to PFC200) and set like this documentation:

    IMG: dok.jpg

     
  • Damian7546 - 2019-09-09

    And I have still problem with initiation my modem :

    IMG: codesyss.jpg

     
  • eschwellinger

    eschwellinger - 2019-09-10

    Hi,
    I think there is a change in newer the new Wago firmware of the PFC and which CODESYS version are you using?
    (3.5.15.0?)

    Could you add a bug report to the CODESYS store -> my question -> bug support
    This need to be changed/adapated either in the example/dokumentation....

    BR
    Edwin

     
  • Damian7546 - 2019-09-10

    Yes, I use 3.5.15.0 version.

    I added bug report , I am waiting for response .

     
  • eschwellinger

    eschwellinger - 2019-09-10

    and which Wago firmware is on this device?
    (Check with the WBM or cbm)

    BR
    Edwin

     
  • Damian7546 - 2019-09-10

    It is may FW version:

    IMG: tst.jpg

     
  • eschwellinger

    eschwellinger - 2019-09-11

    Hi,
    i have send out an email:

    either manually for a test:

    ln -s /dev/ttyMdm0 /serial3
    (for Com4) set

    or to have it fix after reboot in

    /etc/rc.d/S01_link_devices
    Set GSM_MODEM_TTY_PFCXXX_LINK_NAME="/dev/serial3"

    Guess this will work in case the firmware of the modem is still the same. (cross my fingers for this)
    BR
    Edwin

     

Log in to post a comment.