Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi everyone,
I'm trying make remote connection to the PLC.
I can see the PLC from Codesys, but I have a message that device is not responding.
And my question is, how to change some timeout, to make longer waiting time for PLC respond?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Does anyone know if the timeout is currently adjustable? Im connecting trough reverse ssh tunnel and experiencing similar problems. Webvisu and terminal connection are working quite good but codesys has worked only once so far.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi everyone,
I'm trying make remote connection to the PLC.
I can see the PLC from Codesys, but I have a message that device is not responding.
And my question is, how to change some timeout, to make longer waiting time for PLC respond?
Hi,
there is not a setting for the timeout.
Which plc are you using and in which version?
BR
Edwin
Eaton XV-303-15-CE0-A00-1C, Codesys V3.5.11
Panel is connecting to ours VPN server, VNC is connecting without any problems, but Codesys not.
Does anyone know if the timeout is currently adjustable? Im connecting trough reverse ssh tunnel and experiencing similar problems. Webvisu and terminal connection are working quite good but codesys has worked only once so far.
I would use a CODSYS Gateway on remote side if possible.