Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
You can run C / C++ on a PLC which supports this, as far as I know. Then you could use Visual Studio, but it will still not be C#.
If you are used to C# and are now doing IEC-61131-3 with what ever hardware, welcome in the late 70ties, early 80ties. They just disocvered hashmaps and unittests!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi guys,
i have a question about C# Code Integration in CODESYS.
What do I need to integrate C# Code in CODESYS (Visual Studio 2015, Visual Studio 2017)?
It is also possible to integrate C# with Visual Studio Express ?
Can you give me an example how to integrate C# Code in CODESYS?
Thanks in advance.
Originally created by: rickj
Since C# runs on CLR, a non-realtime VM, there is not much chance it's possible to do what you ask.
You can run C / C++ on a PLC which supports this, as far as I know. Then you could use Visual Studio, but it will still not be C#.
If you are used to C# and are now doing IEC-61131-3 with what ever hardware, welcome in the late 70ties, early 80ties. They just disocvered hashmaps and unittests!