Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Xenomai Codesys

hcvoort
2016-10-28
2017-04-04
  • hcvoort - 2016-10-28

    Dear Edwin,

    Is it possible to leverage the rela time capabilities of Xenomai for codesys on a beagle bone?

    BR,

    Carsten

     
  • eschwellinger

    eschwellinger - 2016-10-28

    Hi,
    why not using rt_preemt patched kernel instead of using xenomai?
    BR
    Edwin

     
  • hcvoort - 2016-10-28

    Hi Edwin,

    Thanks for the suggestion. To my knowledge though Xenomai is more hard RT than rt_preempt, isn't it?
    Could you therefor answer on my previous question if Xenomai can be used in user and or kernel mode?

    BR,

    Carsten

     
  • eschwellinger

    eschwellinger - 2016-10-29

    Hi,
    yes it is right, but from my experiance there are not many applications out there which really
    not could deal with rt_preemt patched kernel and really need Xenomai.
    For this runtime release from store it is not possible to use with Xenomai.

    BR
    Edwin

     
  • hcvoort - 2016-10-31

    Hi Edwin,

    Thanks for your quick response. Will the runtime be suitable for use with Xenomai in future releases?

    BR,

    Carsten

     
  • eschwellinger

    eschwellinger - 2016-10-31

    Hello,
    At the moment not planned.
    BR
    Edwin

     
  • hcvoort - 2017-04-03

    Hi Edwin,

    Is it possible to create a xenomai 3 capable codesys in one of the future releases? With the current rt_preempt I get around 70-80 us jitter under load.
    I am using the setup with a BBB industrial with a task cycle time of 1ms. The current jitter results in 'unpleasant' behaviour in our haptic setup.

    BR,

    Carsten Voort

     
  • eschwellinger

    eschwellinger - 2017-04-04

    Hi Carsten,
    still not planned at the moment.

    BR
    Edwin

     

Log in to post a comment.