Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Ethercat redundancy on different NICs

Omar Ampyx
2018-12-07
2019-01-03
  • Omar Ampyx - 2018-12-07

    Hi Erwin,

    Regarding this older thread: l viewtopic.php?t=6756 l

    I have the same problem, disconnecting either network is fine, but when reconnecting a slave loses connection.

    This happens regardless of the selection 'AutoRestart Slaves'. In my opinion, in a redundant network this setting should not matter, since ideally you shouldn't need to restart any slaves.

    Is it possible to have a redundancy on a different network adapter? For example on a beckhoff CX5120 the main network would be on a CmpCX5000 and the secondary on a Cmp CmpEt1000Drv.

    Have a nice weekend, Omar

     
  • eschwellinger

    eschwellinger - 2018-12-07

    Hi,
    should work, even with different Adapters I guess...
    Need to check if there is any special on CmpCX5000

    BR
    Edwin

     
  • Omar Ampyx - 2019-01-03

    Hi Edwin,

    Were you able to check this? Redundancy won't work in my EtherCat network

    Happy 2019!

    Omar

     

Log in to post a comment.