Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

About MC_DigitalCamSwitch function examples..

2018-07-07
2018-07-30
  • JamesPeng-TW - 2018-07-07

    Hi~

    Is there any expert could provide an example or more detail requirement/descriptions on how to using the MC_DigitalCamSwitch function on a standard CoDesys softmotion RTE platform?
    For example, what kind of hardware I would need to test it? Can I just use a normal EtherCAT controlled output module?
    I try to google it but I just find some specified hardware manufacture have some more detail description for this and the output module was made by themselves like OMRON...
    Any advice is appreciated and thanks in advance.

    James

     
  • JamesPeng-TW - 2018-07-25

    Hi~

    My major question is as below:
    When Codesys implementation the MC_DigitalCamSwitch FB, the "TimeStamp" for output feature is included inside the FB or it is hardware manufacture specified?
    I believe it is possible to implement timestamp output function through software inside FB and just want to confirm it.
    Any comment is appreciated.

    James

     
  • eschwellinger

    eschwellinger - 2018-07-30

    Hi James,

    it is included inside the FB and not Hardware dependant.
    BR
    Edwin

     

Log in to post a comment.