| Author |
Message |
|
JamesPeng_TW
|
PostPosted: Sat Jul 07, 2018 8:01 am |
|
Joined: Fri Jun 22, 2018 4:32 am
Posts: 12
|
|
Hi~
Is there any expert could provide an example or more detail requirement/descriptions on how to using the MC_DigitalCamSwitch function on a standard CoDesys softmotion RTE platform?
For example, what kind of hardware I would need to test it? Can I just use a normal EtherCAT controlled output module?
I try to google it but I just find some specified hardware manufacture have some more detail description for this and the output module was made by themselves like OMRON...
Any advice is appreciated and thanks in advance.
James
|
|
| Top |
|
 |
|
JamesPeng_TW
|
PostPosted: Wed Jul 25, 2018 9:25 am |
|
Joined: Fri Jun 22, 2018 4:32 am
Posts: 12
|
|
Hi~
My major question is as below:
When Codesys implementation the MC_DigitalCamSwitch FB, the "TimeStamp" for output feature is included inside the FB or it is hardware manufacture specified?
I believe it is possible to implement timestamp output function through software inside FB and just want to confirm it.
Any comment is appreciated.
James
|
|
| Top |
|
|
|
Edwin Schwellinger
|
PostPosted: Mon Jul 30, 2018 12:29 pm |
|
Joined: Mon Sep 05, 2005 9:42 am
Posts: 3151
|
|
Hi James,
it is included inside the FB and not Hardware dependant.
BR
Edwin
|
|
| Top |
|
|
Login
Register
FAQ
Search