CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum by 3S-Smart Software Solutions GmbH | A member of the CODESYS Group
Deutsche Version English version russian version 
It is currently Thu Dec 13, 2018 2:56 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Thu Aug 29, 2013 8:49 am 
Offline

Joined: Sat Jan 02, 2010 2:05 pm
Posts: 94
Hello all,

I’m using the visualization in the Beckhoff CX9020 PLC (Windows CE7.0) and after some minutes of working the PLC program gets disconnected and I’m not receiving any kind of information on what has happened.

It looks exactly the same than a page fault without the information on what has caused the disconnection.

The only solution to keep working is to unplug and reconnect the PLC completely.

The program I’m using seems to have problems when I’m switching some texts from visible to invisible…

Any idea or hint?

Thank you in advance!

_________________
http://www.robotecnik.com - robots, CNC and PLC programming.


Top
   
PostPosted: Mon Sep 02, 2013 2:53 pm 
Offline
Frequent User
Frequent User

Joined: Thu Jun 14, 2007 9:49 am
Posts: 985
do you have license for the program?
is the visualisation in the PLC or in the PC.
using manual ipaddress or automatic, many computers are dynamic so they will stop scanning.
is address correct 192.186.1.101? for example (is the computer in same region.

if you send the exported program we will have a look at the visibility. (you can put a complete screen invisible.

_________________
shooter@home.nl
computer shooter
paul deelen
jacob van wassenaerstraat 29
NL 5224 GG 's-Hertogenbosch
skype shooter paul.deelen
phone +31736139136


Top
   
PostPosted: Tue Sep 03, 2013 10:40 am 
Offline

Joined: Sat Jan 02, 2010 2:05 pm
Posts: 94
shooter wrote:
do you have license for the program?
Of course I do... I would not install anything pirated or similar into any machine.

shooter wrote:
is the visualisation in the PLC or in the PC.
The controller I'm using is a CX9020 which is an embedded PC with Winodws CE 7.0.
The visualization is running on that CX9020.

shooter wrote:
using manual ipaddress or automatic, many computers are dynamic so they will stop scanning.
is address correct 192.186.1.101? for example (is the computer in same region.
It has nothing to do with IP addresses, I log into the PLC program, debug it without issues and suddenly the PLC gets disconnected due an internal error, not anything related to the IP addresses.

Anyway both IP's are fixed and inside the same range. Therefore this is not the issue.

shooter wrote:
if you send the exported program we will have a look at the visibility. (you can put a complete screen invisible.
I won't, it seems Beckhoff says it is an internal bug with that controller, it seems it fails when you have VISU + CNC + PLC, they will solve that in future releases...

Thank you for trying.

_________________
http://www.robotecnik.com - robots, CNC and PLC programming.


Top
   
PostPosted: Thu Sep 05, 2013 12:55 pm 
Offline
Frequent User
Frequent User

Joined: Thu Jun 14, 2007 9:49 am
Posts: 985
you can still try to slow down the program, by the taskconfiguration put it on 100 ms for test instead of freewheeling.
this will give some time to process the rest of the things, other processes can even be done by only calling them when needed.

btw do you know LIPS propellers they grind shippropellers the big way 6 meters across.

_________________
shooter@home.nl
computer shooter
paul deelen
jacob van wassenaerstraat 29
NL 5224 GG 's-Hertogenbosch
skype shooter paul.deelen
phone +31736139136


Top
   
PostPosted: Thu Sep 05, 2013 2:13 pm 
Offline

Joined: Sat Jan 02, 2010 2:05 pm
Posts: 94
Hello again shooter!

It seems that Beckhoff has some kind of internal bug with that device...

Their technical support team has told me that they are facing issues with that controller, with PLC + VISU + Motion...

:(

So thank you for your answers and kindness! 8)

Quote:
btw do you know LIPS propellers they grind shippropellers the big way 6 meters across

No I don't know about them, but I've searched LIPS propellers and I've been able to see lots of things but not a specific company... any link?

Thank you!

_________________
http://www.robotecnik.com - robots, CNC and PLC programming.


Top
   
PostPosted: Sat Sep 07, 2013 4:18 pm 
Offline
Frequent User
Frequent User

Joined: Thu Jun 14, 2007 9:49 am
Posts: 985
lips is sold to wartsila
http://www.wartsila.com/en_NL/Home

_________________
shooter@home.nl
computer shooter
paul deelen
jacob van wassenaerstraat 29
NL 5224 GG 's-Hertogenbosch
skype shooter paul.deelen
phone +31736139136


Top
   
PostPosted: Mon Sep 09, 2013 9:22 am 
Offline

Joined: Sat Jan 02, 2010 2:05 pm
Posts: 94
Goedemorgen Shooter,

Thank you for the link, neither heard of them, we've developed special machines for grinding lots of parts, even some times we've offered some propellers grinding solutions for Spanish companies.

Interesting to know, I'll let our sales people to know about them and who knows... :)

Thank you for your posts!

_________________
http://www.robotecnik.com - robots, CNC and PLC programming.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited