Unable to start sp rte runtime

Lag-Rainer
2016-07-11
2016-07-27
  • Lag-Rainer - 2016-07-11

    Hi everybody
    This is my first post and I was wandering if someone could help me..

    I had a codesys v2.3. Application that was running properly but last time I started my application..the runtime sp rte haven't started....
    I try ed to run it manually but without result..

    Into the runtime property I read
    Kernel not loaded
    Thread not started.

    How can I fix this problem?
    Thanks in advice.

     
  • eschwellinger

    eschwellinger - 2016-07-12

    Hi,
    if the SP RTE has already worked on this pc (without changing the OS or hardware)
    I would recommend to delete the Bootproject (DEFAULT.prg and DEFAULT.chk) in the RTE directory.

    BR
    Edwin

     
  • Lag-Rainer - 2016-07-18

    Hi Edwin

    thank you very much for your answer ..I'll try to do what you suggest and then I'll let you know ASAP

    Thanks again

     
  • Lag-Rainer - 2016-07-23

    Hi Edwin
    I did what you suggest (delete boot project files)

    but with no result...

    In the RtSysTry system property I still have

    The kernel is not loaded
    The scheduler is inactive

    Do you have any idea on how could I fix this problem please???

    Many thanks..

     
  • eschwellinger

    eschwellinger - 2016-07-26

    Hello Rainer,
    no other idea, than check together online... - email to support
    BR
    Edwin

     
  • Lag-Rainer - 2016-07-27

    Hi Edwin
    I have some new information about the problem....

    I have a Hilsher pci board in order to communicate with I/o field.. and I found that if I delete the Hilcher driver declaration
    in a rte system settings.. everything works correctly...

    May be I have an hw problem on this board?

    I'll let you know

    have a nice day

     

Log in to post a comment.