Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I am trying to comunicate Codesys with the BBB to the BK5150. I have loaded de BK515x.eds and I have installed in the repository. I have select "search the dispositive" but it doesnΒ΄t appear sending this message: "Attention! The device was not found in the repository."
And if we put manually the dispositive BK515x and the CANOPEN is connected binking the light, in Codesys put that the Node state is "PREOPERATIONAL" and doesnΒ΄t change.
Regards, Jon.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi:
I am trying to comunicate Codesys with the BBB to the BK5150. I have loaded de BK515x.eds and I have installed in the repository. I have select "search the dispositive" but it doesnΒ΄t appear sending this message: "Attention! The device was not found in the repository."
And if we put manually the dispositive BK515x and the CANOPEN is connected binking the light, in Codesys put that the Node state is "PREOPERATIONAL" and doesnΒ΄t change.
Regards, Jon.
Hi,
i would set CANOPEN_DEBUG as compiler define and check the plclogger
BR
Edwin