Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
As discribed in the "SoftMotion CNC + Robotics" product-information I first - succesfully - activatetd the BeagleBone runtime license "CODESYS Control for BeagleBone SL" via PLC Settings - Edit Licenses... .
Now I´m facing the Problem that I can´t activate the "SoftMotion CNC + Robotics SL" license.
I get the following error window:
"ReturnCode :403046401, An internal error has occured. Please try it again later"
Is anyone of you getting the same error or can anyone help me with this issue?
I would greatly appreciate your help!
Used Hard- Software:
- Codesys Version V3.5 SP9 Patch2 +
- BeagleBone Black Rev. C
- Win7 64Bit
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I´m new to this Forum - so first of all a hello to all of you!
As a great fan of this BeagleBone CODESYS package I bought the Runtime and CNC +Robotics license in the CODESYS-Store today.
Here the links to those products:
http://store.codesys.com/codesys-contro ... ne-sl.html
http://store.codesys.com/codesys-softmotion-cnc-sl.html
As discribed in the "SoftMotion CNC + Robotics" product-information I first - succesfully - activatetd the BeagleBone runtime license "CODESYS Control for BeagleBone SL" via PLC Settings - Edit Licenses... .
Now I´m facing the Problem that I can´t activate the "SoftMotion CNC + Robotics SL" license.
I get the following error window:
"ReturnCode :403046401, An internal error has occured. Please try it again later"
Is anyone of you getting the same error or can anyone help me with this issue?
I would greatly appreciate your help!
Used Hard- Software:
- Codesys Version V3.5 SP9 Patch2 +
- BeagleBone Black Rev. C
- Win7 64Bit
Hi,
please contact the 3S Support for this.
BR
Edwin