Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
just ported a programm from RPi to BBB and figured out, that the set cycle time within the Task Configuration is not working.
For my programm I'm using own special timers working with the cycle time of the task. As I'm configuring them with TIME variables, which just work down to ms and the task cycle time even set to 200ms is not rising up into the ms times.
Is this a bug?
Regards
Michael
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
just ported a programm from RPi to BBB and figured out, that the set cycle time within the Task Configuration is not working.
For my programm I'm using own special timers working with the cycle time of the task. As I'm configuring them with TIME variables, which just work down to ms and the task cycle time even set to 200ms is not rising up into the ms times.
Is this a bug?
Regards
Michael
Hi,
my Problem is solved as I'm using now ticks.
As it is a bug is still open.
Best Regards
Michael