CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum by 3S-Smart Software Solutions GmbH | A member of the CODESYS Group
Deutsche Version English version russian version 
It is currently Mon Jan 20, 2020 3:19 pm

All times are UTC+01:00

Post new topic  Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Touch panel for webvisu
PostPosted: Sat Jun 22, 2019 4:13 pm 

Joined: Sat Jul 23, 2016 2:34 pm
Posts: 15
I have been looking into options for touch panels to be used with Codesys web visualisations. Any suggestions for good touch panels, to be built into front door of e panel? For our purposes I am interested in different sizes, from 7" and upwards. No distinct preference for the host OS, both a Windows CE or Linux based solution would be fine as long as it can display a web visualisation properly. We have used Weintek panels. These are quite affordable. But the downside is they don't do web visualisations. So we need two separate development environments: Codesys for the PLC logic and Weintek easybuilder software for the HMI.

There should be no aluminium (corrosive dust, salt) for the environment it will be used in. Preferably something where you can make the web browser show full screen and somewhat locked down, so as to prevent operators from using it to watch youtube videos instead of working :lol:

Any suggestions for affordable panels?

PostPosted: Sat Jun 22, 2019 6:57 pm 
Frequent User
Frequent User

Joined: Thu Mar 17, 2016 1:24 pm
Posts: 200
Have a look to Berghof ET series.

Make CODESYS great again

PostPosted: Sat Jun 22, 2019 8:23 pm 

Joined: Thu Aug 04, 2016 4:21 pm
Posts: 55
We use Berghof Et and DC panels too and like it very much!

PostPosted: Sun Jun 23, 2019 9:28 pm 

Joined: Thu Jul 09, 2015 9:55 pm
Posts: 35
Have a look at exor panels. The panels run some embedded linux. They originally run their own software for their own HMI-environment (jmobile), but they have made an addon/patch making the panel run chromium aswell. Look at either eX700-series or the cheaper eSMART-series. The former goes up to 21.5" while the latter goes up to 10.1". I believe all of them are IP66 fronts, and also DNV-GL approved (used on ships). The eX700 also has a few version with IP69 front for use in the food industry. The panels are also dimmable if you need that.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC+01:00

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited