Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
By default, in the example, HandleSpreadPinchGesture is set to TRUE, but I have not been able to get the event called.
What configuration and conditions are required to have HandleSpreadPinchGesture event called?
Thanks!
Note: using Codesys 3.5SP9P8, running a webVisu on a Windows Laptop with Touchscreen.
Frame scrolling, flick detection, multiple IEC touch detection, touch of multiple visu elements at the same time are all working fine in the multi touch example.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Can we conclude that the multiTouch is limited to the following (please correct if there are other features that are not mentionned here):
HandlePanGesture is called after moving the picture inside the frame (on finger released). ("Scrolling" page of the example)
HandleTouchEvent is called as soon as at least 1 finger touches the screen, can track up to 5 fingers at the same time. ("Flick detection" page of the example)
HandleFlickgesture is called if a swipe event occurs (on finger released). ("Flick detection" page of the example)
Simultaneous interaction with multiple Visu Elements is available out of the box when enabling MultiTouch. ("Multiple Inputs" and "Tow-Hand inputs" pages of the example)
Thank you!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
SsS hat geschrieben:
Ok.
Thank you for the follow-up.
Can we conclude that the multiTouch is limited to the following (please correct if there are other features that are not mentionned here):
- HandlePanGesture is called after moving the picture inside the frame (on finger released). ("Scrolling" page of the example)
- HandleTouchEvent is called as soon as at least 1 finger touches the screen, can track up to 5 fingers at the same time. ("Flick detection" page of the example)
- HandleFlickgesture is called if a swipe event occurs (on finger released). ("Flick detection" page of the example)
- Simultaneous interaction with multiple Visu Elements is available out of the box when enabling MultiTouch. ("Multiple Inputs" and "Tow-Hand inputs" pages of the example)
Thank you!
Sounds good!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have been experimenting with Codesys MultiTouch Example
By default, in the example, HandleSpreadPinchGesture is set to TRUE, but I have not been able to get the event called.
What configuration and conditions are required to have HandleSpreadPinchGesture event called?
Thanks!
Note: using Codesys 3.5SP9P8, running a webVisu on a Windows Laptop with Touchscreen.
Frame scrolling, flick detection, multiple IEC touch detection, touch of multiple visu elements at the same time are all working fine in the multi touch example.
Hello sir,
do you mind telling me what browser and version you are currently using for the webvisu?
Best regards,
Marcel
Yes of course!
I have tried it on :
- Chrome Version 70.0.3538.110
- IE Version 11.407.17134.0
Hello sir,
do you know if this issue still exists in SP13 Patch 2?
Or are you limited to SP9 Patch 8?
Best regards,
Marcel
Hello sir,
after talking to the lead developer he mentioned that the spread-pinch feature was never released and therefore is not working.
Best regards,
Marcel
Ok.
Thank you for the follow-up.
Can we conclude that the multiTouch is limited to the following (please correct if there are other features that are not mentionned here):
Thank you!
Hey,
sorry for the delay. Just wanna let you know I have not forgotten you.
Currently just a bit busy!
Best regards,
Marcel
Sounds good!
Are there plans to support the spread pinch? Currently it does not appear to work in SP17
No plans yet. Currently we don't have a use case for elements which would need this gesture.
Best regards,
Marcel