Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
As it turns out after further investigation my local SoftPLC wasn't even set up to support WebVisu as it should have been by an installer.
I tinkered around in CODESYSControl.cfg (which sets up my SoftPLC - I don't know if the name is universal) and added: to [ComponentManager] Component.3=CmpTargetVisuStub Component.4=CmpWebServer
* Component.5=CmpWebServerHandlerV3
a new section: [CmpTargetVisuStub]
Program="CODESYSControlService.exe"
CommandLine=-r targetvisu.cfg
There must be some description of these files available but as I got them handed over to me I haven't looked for documentation.
π
2
Last edit: kristiankroier 2021-11-29
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi!
Everytime i try to download a project with visualization i'm receiving the following errors:
- [FATAL ERROR] Unresolved reference: 'TARGETVISUFINDBYID'
- [FATAL ERROR] Unresolved reference: 'TARGETVISUNOTIFY'
- [FATAL ERROR] Unresolved reference: 'TARGETVISUCYCLIC'
Any idea why?
Codesys version: 3.5.12.20.
I know this post is a little dated but did you find an answer? I am seeing the exact same issue with the latest version of Codesys, 3.5.17.10.
hm.. which plc are you using?
This should be part of the delivery.
I am using a softPLC.
Control Win or Control RTE?
I don't know which but it turns out it is a matter of a missing license on the SoftPLC.
Hi. Is this confirmed to be a license issue ? I ran into precisely the same issue, see https://forge.codesys.com/forge/talk/Engineering/thread/8bdf13b8f6/?limit=25
Thank you!
As it turns out after further investigation my local SoftPLC wasn't even set up to support WebVisu as it should have been by an installer.
I tinkered around in CODESYSControl.cfg (which sets up my SoftPLC - I don't know if the name is universal) and added:
to [ComponentManager]
Component.3=CmpTargetVisuStub
Component.4=CmpWebServer
* Component.5=CmpWebServerHandlerV3
a new section:
[CmpTargetVisuStub]
Program="CODESYSControlService.exe"
CommandLine=-r targetvisu.cfg
There must be some description of these files available but as I got them handed over to me I haven't looked for documentation.
Last edit: kristiankroier 2021-11-29
No this is not the default configuration of the CODESYSControl.cfg.
Seems to be an outdated one. Maybe someone tried to change something..
Anyone solved the issue?
Codesys version: 3.5.18.40