Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi all,
I use CODESYS in domotic application, and it's necessary that the transfer between PLC server and targets (PCs, smartphones, _ etc.) be as fast as possible.
If I use CODESYS WEBVISU, the visu application is installed on the PLC server. When I connect with a device remotely (with a smartphone, _, etc.) the response times are long because the web page must be transferred from the PLC to the device.
Based on the above, my question is: is it possible, with CODESYS, to create an application integrated in the device (integrated, for example, in smartphone device) and transfer, between PLC and device, only the data with JSON utility?
Thanks!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all,
I use CODESYS in domotic application, and it's necessary that the transfer between PLC server and targets (PCs, smartphones, _ etc.) be as fast as possible.
If I use CODESYS WEBVISU, the visu application is installed on the PLC server. When I connect with a device remotely (with a smartphone, _, etc.) the response times are long because the web page must be transferred from the PLC to the device.
Based on the above, my question is: is it possible, with CODESYS, to create an application integrated in the device (integrated, for example, in smartphone device) and transfer, between PLC and device, only the data with JSON utility?
Thanks!