Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
In a production environment we are experiencing some issues where the PLC gets completely stuck after a while and does not respond to actions anymore. In the Codesys development enivornment we can see the values being updatet, but as soon as we log off we are unable to make a connection to the PLC anymore. The PLC doesn't respond to start/stop actions anymore either, as well as the webvisu is unreachable. The only resort is to reboot the computer.
Inspecting this inconvience, shows the following error in the PLC log. Can anyone enlighten what this means, what could cause this and/or what we could do to debug this?
Thanks in advance!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The error occurred again. Nothing remarkable in the task configuration can be found. Is this a code issue or is this more related to the installation of the RTE or Windows itself (Windows 10)?
It's rather hard to believe that I'm the only who has seen this error message before. In any case - thanks in advance!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
This occured in PLC version CODESYS 3.5.15.0 on an Intel NUC. We have unexpectedly resolved the issue since, not knowing what caused it or how we actually happened to solve it.
Regards,
Reno
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
In a production environment we are experiencing some issues where the PLC gets completely stuck after a while and does not respond to actions anymore. In the Codesys development enivornment we can see the values being updatet, but as soon as we log off we are unable to make a connection to the PLC anymore. The PLC doesn't respond to start/stop actions anymore either, as well as the webvisu is unreachable. The only resort is to reboot the computer.
Inspecting this inconvience, shows the following error in the PLC log. Can anyone enlighten what this means, what could cause this and/or what we could do to debug this?
Thanks in advance!
The error occurred again. Nothing remarkable in the task configuration can be found. Is this a code issue or is this more related to the installation of the RTE or Windows itself (Windows 10)?
It's rather hard to believe that I'm the only who has seen this error message before. In any case - thanks in advance!
Hi,
need more information which plc in which version?
BR
Edwin
Hi Edwin,
This occured in PLC version CODESYS 3.5.15.0 on an Intel NUC. We have unexpectedly resolved the issue since, not knowing what caused it or how we actually happened to solve it.
Regards,
Reno
Hi,
have you found the solution to fix the question?