CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum by 3S-Smart Software Solutions GmbH | A member of the CODESYS Group
Deutsche Version English version russian version 
It is currently Sun Dec 16, 2018 3:58 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed Jun 27, 2018 3:33 pm 
Offline

Joined: Fri Jun 22, 2018 4:32 am
Posts: 12
Hi everybody~
I'm used to working with Rockwell/ Siemens/ Mitsubishi and new to CoDeSys. Since we have considered to change to CoDeSys control system, we are trying to build a clean testing environment using existing hardware before we purchase the normal runtime license and hardware.

Below is the Hardware and Operating system information:
OS: Windows 7 Ultimate SP1 Build 7601, 64 Bit
CPU: Intel Q9400 Core2 Quad @ 2.66 GHz
Installed memory: 8GB
Ethernet card: Intel 82567LM-3

Installed CoDeSys package:
1. CODESYS Control Win 64 V3.5SP12Patch4 Setup.exe
2. Setup_CODESYSControlRTE64V3.5SP12Patch4.exe

Since the ethernet chipset driver signature problem, we run win7 in testing mode(bcdedit /set testsigning on) currently.
We could run control win x64 without any problem but when we change to run control rte(click start from system tray), it never starts normally.
We have checked the rte manual and find out there are some key-values in system reg. missing(please check attached file "System_register.png").
We also find out some value in control rte configuration was not correct like kernel version...etc(please check attached file "RTE_Configuration.png").
I also attached control rte config file(please check attached file "CODESYSControl_cfg.png").

I'm wondering if anybody could give me some comment or help to solve this issue and help the testing step forward.
Thanks in advance.

James


You do not have the required permissions to view the files attached to this post.


Top
   
PostPosted: Thu Jun 28, 2018 2:03 pm 
Offline
Site Admin

Joined: Mon Sep 05, 2005 9:42 am
Posts: 3019
Hi,
according the signing problem on Windows 7 - 64Bit
You need to install this security patch:
https://technet.microsoft.com/en-us/lib ... ty/3033929

BR
Edwin


Top
   
PostPosted: Thu Jun 28, 2018 2:52 pm 
Offline

Joined: Fri Jun 22, 2018 4:32 am
Posts: 12
Hi Edwin,

Got it and thanks for the information.
I would try it and update you.

James


Top
   
PostPosted: Thu Jun 28, 2018 3:18 pm 
Offline

Joined: Fri Jun 22, 2018 4:32 am
Posts: 12
Hi Edwin,

It is working.....Thanks...
BTW, is there any place we could find it out the issue and solution by ourself instead of bring up question in this forum?
Or you guys want us to bring up all the issues here?

James


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited