CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum by 3S-Smart Software Solutions GmbH | A member of the CODESYS Group
Deutsche Version English version russian version 
It is currently Tue Dec 18, 2018 4:41 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Control Win stopped
PostPosted: Tue Feb 20, 2018 2:26 pm 
Offline

Joined: Mon Feb 19, 2018 5:49 pm
Posts: 2
Location: Switzerland
Hi,

I have a problem with codesys control Win, after a certain time control Win stopped.

01/26/18 15:42:06: --------------------------------------------------------------------------
01/26/18 15:42:06: CODESYS Control Win V3 Service started
01/26/18 15:42:06: Config file:
01/26/18 15:42:06: C:\ProgramData\CODESYS\CODESYSControlWinV3\D5050FE1\targetvisuextern.Standard.cfg
01/26/18 15:42:08: CODESYS Control Win V3 Service stopped
02/18/18 11:18:56: CODESYS Control Service: Warning: No License found, terminating in approx. 5 minutes.
02/18/18 11:24:25: CODESYS Control Win V3 Service stopped
02/19/18 05:34:36: --------------------------------------------------------------------------

The Power Efficiency Diagnostic is disable.
Licenses OK.

Codesys Control Win V3.5.12.0
Windows 7 pro X64

Thank you


Top
   
 Post subject: Re: Control Win stopped
PostPosted: Tue Feb 20, 2018 3:00 pm 
Offline
Site Admin

Joined: Mon Sep 05, 2005 9:42 am
Posts: 3022
Hi,
enable the logger:

c:\ProgramData\CODESYS\CODESYSControlWinV3x64\801BFF8C\CODESYSControl.cfg
by removing these ';'

[CmpLog]
;Logger.0.Name=PlcLog
;Logger.0.Filter=0xFFFFFFFF
;Logger.0.Enable=1
;Logger.0.MaxEntries=100000
;Logger.0.MaxFileSize=500000
;Logger.0.MaxFiles=3
;Logger.0.Backend.0.ClassId=0x0000010B ;sends logger messages to SysOut
;Logger.0.Backend.1.ClassId=0x00000104 ;writes logger messages in a file
;Logger.0.Backend.2.ClassId=0x00000135 ;sends logger messages as UDP syslog
;Logger.0.Type=0x314 ;Set the timestamp to RTC
;Logger.1.Name=CommLog
;Logger.1.Enable=1

then check the PlcLog.csv after the stop/crash ...

BR
Edwin


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited