CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum
Deutsche Version English version russian version 
It is currently Thu Aug 16, 2018 7:31 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Thu Nov 23, 2017 1:40 pm 
Offline

Joined: Wed Nov 18, 2015 8:47 am
Posts: 3
Hello

Is ist possible to downgrade a controller with CODESYS Control for PFC 200 from 3.5.10.20 to 3.5.9.20?
When I update the controller with 3.5.10.20 to 3.5.9.20 then it says update finished. (see pic)
After the update the controller is no more reachable so I have to reboot it. Thats ok.
But after the reboot it still has version 3.5.10.20 again.


You do not have the required permissions to view the files attached to this post.


Top
   
PostPosted: Fri Nov 24, 2017 5:49 am 
Offline
Site Admin

Joined: Mon Sep 05, 2005 9:42 am
Posts: 2794
Hi,
on runtime side I always would recommend to use current version (securiy update included & many bugfixes etc)
This means:
Even if you decide to work in CODESYS with 3.5SP9/SP10 whatever, it is safe to use
Wago Firmware 10 and CODESYS Runtime 3.5SP11Patchx.
(Just install the ipk of the runtime to the PFC200 controller )- if you do this I would even not install the SP11 PFC200 Package into your
SP10/SP10 CODESYS / Package Manager
- just use everything in our selected version - only use the ipk our of the store download.


BR
Edwin


Top
   
PostPosted: Wed Dec 20, 2017 4:48 pm 
Offline

Joined: Wed Nov 18, 2015 8:47 am
Posts: 3
The question came up when I wanted to simulate a behavior of a customers machine. This machine was with an older package, so I had to downgrade my test station, because the package version was interesting.

I restored the Wago firmware over an SD card and the applicated the version I needed. This way is just not nice and costs time.


Top
   
PostPosted: Sat Dec 30, 2017 6:49 am 
Offline
Site Admin

Joined: Mon Sep 05, 2005 9:42 am
Posts: 2794
Hi,

important commands are:

uninstall:
remove codesyscontrol

install older Version
ipkg install codesyscontrol_arm_pfc200_V3.5.x.x.ipk

stop plc:
/etc/init.d/codesyscontrol stop

start plc:
/etc/init.d/codesyscontrol start

BR
Edwin


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited