Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Is it possible to access the user LED's on the front of the PFC200 with the CODESYS V3 runtime installed? I know in e!Cockpit they have function blocks to access them.
Thanks,
Raymond.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
"c:\Users\<yourwindowsusername>\CODESYS Control for PFC200 SL\3.5.11.0\Examples\HowToControlUserLEDs.project"
this does work for the PFC100 too. You need just Change the plc in the device tree to PFC100.</yourwindowsusername>
Hello,
Is it possible to access the user LED's on the front of the PFC200 with the CODESYS V3 runtime installed? I know in e!Cockpit they have function blocks to access them.
Thanks,
Raymond.
Hi,
"c:\Users\<yourwindowsusername>\CODESYS Control for PFC200 SL\3.5.11.0\Examples\HowToControlUserLEDs.project"
this does work for the PFC100 too. You need just Change the plc in the device tree to PFC100.</yourwindowsusername>
BR
Edwin
HowToControlUserLEDs.project [150.79 KiB]
Ah! I didn't even think of looking in the examples folder. Thank you.