Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hello everyone, I have a problem with Creating an Edge Gateway on the Automation Server.
When I try to add Gateway from "automation server - connect-edge-gateway" in Codesys V3.5 SP14, the message is displayed: "The device is not supported"
As Gateway i use RaspberryPi3 B+
I am asking you Friends for help in solving the problem, thanks a lot.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello everyone, I have a problem with Creating an Edge Gateway on the Automation Server.
When I try to add Gateway from "automation server - connect-edge-gateway" in Codesys V3.5 SP14, the message is displayed: "The device is not supported"
As Gateway i use RaspberryPi3 B+
I am asking you Friends for help in solving the problem, thanks a lot.
Hi,
the embedded Gateway in these CODESYS SL (Pi,BeagleBone,PFC...) devices do not have the edge gateway function.
You need an additional debian file, which you need to install on your PI.
I'll send this out by mail.
BR
Edwin
PS:
For others who are intressted in using it:
CODESYS Automation Server:
https://store.codesys.com/codesys-autom ... rsion.html
Edge Gateway ( this download gives the Windows Version of the Edge Gateway)
https://store.codesys.com/codesys-edge-gateway.html
Additional you need to install the following Package in CODESYS:
https://store.codesys.com/codesys-autom ... ector.html m
Dear sir Edwin, I installed the file and everything is working properly, I'm proceeding to the next steps, thank you kindly for your support