Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Good morning,
Is it possible, having the source code of the project, to extract the images included in the project?
I rebuilt a project by importing all the components into a new empty project but I can't find where the images are.
I did this operation because the old project, which after years that I continued to modify, had a size of 4 Mega.
Now, after importing it into a new project, the file is 600 K and works properly.
Is there a way to clean up a project by eliminating what is not necessary?
Thanks, Alberto
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I tried to delete everything from the project and save it empty.
The file is still 4.2 Mega.
Probably the 3 images I inserted are still inside and probably they are the cause of the size of the project.
Can I extract them to resize them?
How can I extract them?
Thanks, Alberto
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
this is a known bug,
The workaround is:
Open an new empy project - and copy all related except the imagepool which have this included (serialized/project embedded images in )
This will degrease the size and solve it.
To have them back - just download the project to the plc and the pull the images via the CODESYS filebrowser from the plc
(PlcLogic/Visu ...)
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Good morning,
Is it possible, having the source code of the project, to extract the images included in the project?
I rebuilt a project by importing all the components into a new empty project but I can't find where the images are.
I did this operation because the old project, which after years that I continued to modify, had a size of 4 Mega.
Now, after importing it into a new project, the file is 600 K and works properly.
Is there a way to clean up a project by eliminating what is not necessary?
Thanks, Alberto
I tried to delete everything from the project and save it empty.
The file is still 4.2 Mega.
Probably the 3 images I inserted are still inside and probably they are the cause of the size of the project.
Can I extract them to resize them?
How can I extract them?
Thanks, Alberto
Hi,
this is a known bug,
The workaround is:
Open an new empy project - and copy all related except the imagepool which have this included (serialized/project embedded images in )
This will degrease the size and solve it.
To have them back - just download the project to the plc and the pull the images via the CODESYS filebrowser from the plc
(PlcLogic/Visu ...)
BR
Edwin