CODESYS - the IEC 61131-3 automation software
https://forum.codesys.com/

Old problem reoccurring Raspberry 7” touch screen, webvisu interrupts.
https://forum.codesys.com/viewtopic.php?f=21&t=9633
Page 1 of 1

Author:  johan76swart [ Wed Mar 27, 2019 9:35 am ]
Post subject:  Old problem reoccurring Raspberry 7” touch screen, webvisu interrupts.

With reference to topic https://forum.codesys.com/viewtopic.php?t=6767#p14361

I am running a Raspberry Pi 3B and 3B+ and 7” touch screen with the same problem. The Webvisu removes the localhost client and about 22 seconds later creates it again. I however have not seen this done when I connect form my web-browser. The remote client gets created and stays created. Is this an inherent problem with the localhost setup?

I have the localhost setup as per link :

https://forum.codesys.com/viewtopic.php?t=8639#p23776

My Setup is as follows:

- CODESYS 3.5 SP11 Patch 3 + (32-bit)
- CODESYS Control for Raspberry Pi 3.5.14.10

Any help would be appreciated.

Below is a bit of the log from cat /tmp/codesyscontrol.log showing the problem.

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/