Hi!
I have reconnected my old Raspberry with Codesys, updated Codesys to 3.4.15 and also updated the Pi to 3.5.14.
But now i can't connect, Codesys won't see my Pi, please advice.
I can read system info and start/stop but not login and scan network doesnΓ€t find anything.
/U
Hi, add the Pi IPAdress as Gateway address and scan via this Gateway ( Gateway embedded in the PI)
BR Edwin
Edwin,
then I get "Please check that the gatweay is running"
Hi, you need to check if the runtime is up and running: 1. by ssh with the following command: top
I'm connected and the runtime is started, right? But I still can't scan the gateway
Hi, you need to disable 'preticable network names' by sudo raspi-config this will solve it I'm pretty sure.
It's disabled but I still can't scan network
Log in to post a comment.
Hi!
I have reconnected my old Raspberry with Codesys, updated Codesys to 3.4.15 and also updated the Pi to 3.5.14.
But now i can't connect, Codesys won't see my Pi, please advice.
I can read system info and start/stop but not login and scan network doesnΓ€t find anything.
/U
Hi,
add the Pi IPAdress as Gateway address and scan via this Gateway ( Gateway embedded in the PI)
BR
Edwin
Edwin,
then I get "Please check that the gatweay is running"
Hi,
you need to check if the runtime is up and running:
1. by ssh with the following command:
top
see screenshot
BR
Edwin
I'm connected and the runtime is started, right?
But I still can't scan the gateway
/U
Hi,
you need to disable 'preticable network names' by
sudo raspi-config
this will solve it I'm pretty sure.
BR
Edwin
It's disabled but I still can't scan network