Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi,
even on Pi this is not really needed,
you could use on Raspian Stretch and use Chromium in full screen mode - this feels then similar to
targetvisu.
how to do this?
Add a CODESYS Project with webvisualisation and then:
For Codesys 3.5.12.10
I started codesyscontrol in the raspberry pi, then checked the codesyscontrol.log file.
I get "Visu_PRG: StartTargetvisu failed with result: 12"
WebVisu works, just not TargetVisu.
That's like it is. The Pi only supports WebVisu. And if you would start freshly with a new project, you should not even be able to add a TargetVisu.
Gesendet von meinem LG-H870 mit Tapatalk
Hi,
even on Pi this is not really needed,
you could use on Raspian Stretch and use Chromium in full screen mode - this feels then similar to
targetvisu.
how to do this?
Add a CODESYS Project with webvisualisation and then:
sudo nano /home/pi/.config/lxsession/LXDE-pi/autostart
lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
@xscreensaver -no-splash
@point-rpi
@xset s off
@xset s noblank
@xset -dpms
@chromium-browser --noerrdialogs --kiosk --incognito http://localhost:8080/webvisu.htm
BR
Edwin