Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi,
I my case this works with your Project.
Possible to update everything?
-Compiler Version is set to SP10 Visuprofile too
-Seems that you work with current CODESYS Version (SP12)
So the steps are (install the 3.5SP12Patchx runtime Version on the PI side by the update tool):
-Update the Project by rightlick to the plc in the device tree ( would use 3.5Sp12Patchx / current Version)
-update visu and compilerversion to current
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
My visualization won't run without shutting down since I added a trace. Any ideas what I am doing wrong?
benchpi.project [216.76 KiB]
log.xml [13.92 KiB]
Hi,
I my case this works with your Project.
Possible to update everything?
-Compiler Version is set to SP10 Visuprofile too
-Seems that you work with current CODESYS Version (SP12)
So the steps are (install the 3.5SP12Patchx runtime Version on the PI side by the update tool):
-Update the Project by rightlick to the plc in the device tree ( would use 3.5Sp12Patchx / current Version)
-update visu and compilerversion to current
BR
Edwin
This solved the problem.
Thanks
Nikk