Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Raspberry Pi 3B+

Anonymous
2018-03-14
2018-07-28
  • Anonymous - 2018-03-14

    Originally created by: Primitive Source

    Hi, with the new release of the Pi 3 B+, will codesys still work?

     
  • PJE - 2018-03-14

    From the specifications released I don't see any reason why it would not work.

    Sent from my iPhone using Tapatalk Pro

     
  • eschwellinger

    eschwellinger - 2018-03-14

    Hi,
    as soon we have this pice of new PI3 B+ hardware in our hands we let you know if
    it works or not

    BR
    Edwin

     
  • eschwellinger

    eschwellinger - 2018-03-16

    Hi,

    this new PI3B+ works - from my point of view without any restriction.
    Using: Raspbian Stretch 2018-03-13 and 3.5.12.10 CODESYS Raspberry PI Package.
    https://youtu.be/IgwDBPoJBek
    Feel free to share your experiance with using this new PI.

    BR
    Edwin

     
  • eschwellinger

    eschwellinger - 2018-07-28

    Important Information for PI3B plus and current Raspbian:

    If someone is using PI3B+ with Profinet Controller / Device on eth0.

    There is a known issue with current Raspian and new Ethernet Driver:
    the following steps are needed:

    sudo apt install vlan # install VLAN-Paket
    sudo modprobe 8021q # load 8021q Kernelmodul

    loading the kernel module could be done on restart by:
    sudo su -c 'echo "8021q" >> /etc/modules'

    BR
    Edwin

     

Log in to post a comment.