Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
this new PI3B+ works - from my point of view without any restriction.
Using: Raspbian Stretch 2018-03-13 and 3.5.12.10 CODESYS Raspberry PI Package. https://youtu.be/IgwDBPoJBek
Feel free to share your experiance with using this new PI.
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Originally created by: Primitive Source
Hi, with the new release of the Pi 3 B+, will codesys still work?
From the specifications released I don't see any reason why it would not work.
Sent from my iPhone using Tapatalk Pro
Hi,
as soon we have this pice of new PI3 B+ hardware in our hands we let you know if
it works or not
BR
Edwin
Hi,
this new PI3B+ works - from my point of view without any restriction.
Using: Raspbian Stretch 2018-03-13 and 3.5.12.10 CODESYS Raspberry PI Package.
https://youtu.be/IgwDBPoJBek
Feel free to share your experiance with using this new PI.
BR
Edwin
Important Information for PI3B plus and current Raspbian:
If someone is using PI3B+ with Profinet Controller / Device on eth0.
There is a known issue with current Raspian and new Ethernet Driver:
the following steps are needed:
sudo apt install vlan # install VLAN-Paket
sudo modprobe 8021q # load 8021q Kernelmodul
loading the kernel module could be done on restart by:
sudo su -c 'echo "8021q" >> /etc/modules'
BR
Edwin