Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi All,
We want to use Beckhoff ep6002 2-channel serial interface module to communicate rs232 or rs485 compatible sensors via ethercat. We use raspberry pi to our project and I can communicate rs232 or rs485 compatible sensors using Codesys CAA SerialCom library via Raspberry pi serial port. Are there any library like CAA SerialCom to communicate these sensors using ep6002 module via ethercat? Thank you for your interest.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi All,
We want to use Beckhoff ep6002 2-channel serial interface module to communicate rs232 or rs485 compatible sensors via ethercat. We use raspberry pi to our project and I can communicate rs232 or rs485 compatible sensors using Codesys CAA SerialCom library via Raspberry pi serial port. Are there any library like CAA SerialCom to communicate these sensors using ep6002 module via ethercat? Thank you for your interest.