Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi Chris,
Are you using this example here?
l viewtopic.php?f=23&t=6247&start=15#p19180 l
check if the reader is running ok, when you connect it an use it as a HID device under Linux (open a bash/ commend line and check if it works)
Sure this example works only if there is a webvisu running (this handler is called in the visu context)
If you need a RFID reader more generic it should be possible to read the id's under /dev/...
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Got someone this project to run?
My RFID Code is always empty.
Chris
Hi Chris,
Are you using this example here?
l viewtopic.php?f=23&t=6247&start=15#p19180 l
check if the reader is running ok, when you connect it an use it as a HID device under Linux (open a bash/ commend line and check if it works)
Sure this example works only if there is a webvisu running (this handler is called in the visu context)
If you need a RFID reader more generic it should be possible to read the id's under /dev/...
BR
Edwin