Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I installed CODESYS V3.4 SP10 Patch 2 + and CODESYS Control for Raspberry PI 3.5.10.20.
When creating a project, I get 5 error messages about missing libraries (CmpApp, CAA Callback Extern, CAA Device Diagnosis, CAA Behaviour Model and CAA Ressource Manager Extern).
How can I solve this issue?
Thanks in advance.
Steve
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
either:
1) goto the Library Manager and download the missing libraries (there should ne a button to do this)
or:
2) udate everthing to current Version (3.5SP11Patch1) in this case
Existing projects need to be updated to (rightclick on device -> update device in the deivce tree - also need for fieldbus in some cases)
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I installed CODESYS V3.4 SP10 Patch 2 + and CODESYS Control for Raspberry PI 3.5.10.20.
When creating a project, I get 5 error messages about missing libraries (CmpApp, CAA Callback Extern, CAA Device Diagnosis, CAA Behaviour Model and CAA Ressource Manager Extern).
How can I solve this issue?
Thanks in advance.
Steve
Hi,
either:
1) goto the Library Manager and download the missing libraries (there should ne a button to do this)
or:
2) udate everthing to current Version (3.5SP11Patch1) in this case
Existing projects need to be updated to (rightclick on device -> update device in the deivce tree - also need for fieldbus in some cases)
BR
Edwin
Hello,
I discover CODESYS and was not aware about the need to download each libraries before compiling application.
Many thanks for your help.
Regards,
Steve