Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
how can I connect CodeSys V3 to 2 or more devices with CAN Gateway (all devices us the same)?
When CODESYS scan is performed on a network (CAN or Ethernet) with multiple devices, i should be able to differentiate between devices that respond (through SA or another way ...)
thanks
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
how can I connect CodeSys V3 to 2 or more devices with CAN Gateway (all devices us the same)?
When CODESYS scan is performed on a network (CAN or Ethernet) with multiple devices, i should be able to differentiate between devices that respond (through SA or another way ...)
thanks
Hi,
use 'set active application'
BR
Edwin
Hi,
thank you for your reply.
i connect 2 devices to my peakcan but in the scan no one is show
Hi,
which plc are you using on which you want to login via CAN?
BR
Edwin