CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum by 3S-Smart Software Solutions GmbH | A member of the CODESYS Group
Deutsche Version English version russian version 
It is currently Sat Dec 07, 2019 5:51 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Wed Oct 28, 2015 2:08 pm 
Offline

Joined: Fri Oct 23, 2015 2:46 am
Posts: 7
Im trying to connect to a Phoenix Contact Inline Bus Coupler with Codesys ver 3.5.7.0 on Raspberry Pi2. I am getting these errors in the log:

No local Ethernet/IP Adapter found. Class 1 connection as target not supported.
SetOption unable to set Socket_SO_REUSEPORT
Connection Failure. Extended Status: Invalid network Connection parameter.

I have the Ethernet set up as:
Attachment:
Ethernet adapter.PNG


I can connect to the PI and Bus Coupler. I just cant get the PI to talk to the Bus Coupler


You do not have the required permissions to view the files attached to this post.


Top
   
PostPosted: Thu Oct 29, 2015 9:05 am 
Offline
Site Admin

Joined: Mon Sep 05, 2005 9:42 am
Posts: 3562
Hi,
Quote:
No local Ethernet/IP Adapter found. Class 1 connection as target not supported.

this is only an info - no problem
Quote:
SetOption unable to set Socket_SO_REUSEPORT

this is only an info - no problem

Quote:
Connection Failure. Extended Status: Invalid network Connection parameter

this is the Problem.

One question is there a reason why not using the eds file of the Phönix device?
(-> you are using obvisouly the generic ethernet ip device)

So I would recommend to install the EDS file from your device (from the manufacturer), than it is easy to configure ;-)

BR
Edwin


Top
   
PostPosted: Thu Oct 29, 2015 2:05 pm 
Offline

Joined: Fri Oct 23, 2015 2:46 am
Posts: 7
Ok I have the EDS file. How do I install the EDS file into Codesys?

thanks for your help!


Top
   
PostPosted: Thu Oct 29, 2015 2:09 pm 
Offline

Joined: Fri Oct 23, 2015 2:46 am
Posts: 7
I figured it out. VERY COOL!


Top
   
PostPosted: Mon Sep 19, 2016 2:25 pm 
Offline

Joined: Tue Feb 25, 2014 9:20 am
Posts: 13
I have a phoenix contact ILB ETH 24 DI16 DIO16-2TX and want to configure it with the same software CODESYS 3.5 on exor PLC. Do I still have to use the EDS file as I am looking at the manufacturer's recommended software to program the contacts and there is no EDS file on the list for this unit. Any reply would be appreciated.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited