Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
How i can autosave data in PLC (raspberry) from codesys?? i want sensor data print out.
trend or trace? in visualization there is "trend storage" where it saves data???
is there block for that purpose?
recipe command?
or how?
Help pls!
here is trace and trend example. how i get codesys to save that data on PLC?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
How i can autosave data in PLC (raspberry) from codesys?? i want sensor data print out.
trend or trace? in visualization there is "trend storage" where it saves data???
is there block for that purpose?
recipe command?
or how?
Help pls!
here is trace and trend example. how i get codesys to save that data on PLC?
you may refer to the codesys store File sample to store your data into a data file
http://store.codesys.com/file-utilities.html
If you wish to spend some money can look at the CSV utility at codesys store.
By the way have you expand your SDCARD. Cause if you want store data you have to expand your sdcard size on RSPI.
Thanks john!
More questions:
Can i make with that CSV utility tool "auto-saving" program?? can i example: save data every morning 6:00AM in direct folder??
Hi,
this is for sure possible.
BR
Edwin
Is there Ladder program example how to do that?