Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I'm at the same point right now.
First thing you have to-do is to write your own devdesc.xml file.
Second is to create your own lib.
There is a sample on your local hard drive inside your user folder if you have installed the RaspberryPi package.
Also is a lib example in there.
Then Erikk uploaded his own devdesc.xml and a lib to run SHT-21 sensors (thanks again), see "Looking for library to run a SHT-1x sensor" discussion.
This may helps you to have an idea where to start.
Good luck, still working on my I2C-Device... and will upload it as soon as all is working.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Originally created by: on4bhm
Hi,
Is it possible to integrate my own (not in the standard device included in the raspberry pi) i2c device
without using any aditional sofware?
Can someone explain how to do this?
kind regards
Hi on4bhm
I'm at the same point right now.
First thing you have to-do is to write your own devdesc.xml file.
Second is to create your own lib.
There is a sample on your local hard drive inside your user folder if you have installed the RaspberryPi package.
Also is a lib example in there.
Then Erikk uploaded his own devdesc.xml and a lib to run SHT-21 sensors (thanks again), see "Looking for library to run a SHT-1x sensor" discussion.
This may helps you to have an idea where to start.
Good luck, still working on my I2C-Device... and will upload it as soon as all is working.