Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi,
is it possible to use/access the current plcload from iec code?
yes, that way:
declare
Result : RTS_IEC_RESULT;
udiProzessorLoad: UDINT;
Result:=SchedGetProcessorLoad(udiProzessorLoad);
you need to add CmpSchedule.library and SysTypes2 Interfaces in LibraryManager.
by the way what is an easy way to find and add the libraries and fb's:
Enter the library name or fb name in the fulltext search on add library, if you the select the fb the library will be added by placeholder to
the librarymanager.
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
is it possible to use/access the current plcload from iec code?
yes, that way:
declare
Result : RTS_IEC_RESULT;
udiProzessorLoad: UDINT;
Result:=SchedGetProcessorLoad(udiProzessorLoad);
you need to add CmpSchedule.library and SysTypes2 Interfaces in LibraryManager.
by the way what is an easy way to find and add the libraries and fb's:
Enter the library name or fb name in the fulltext search on add library, if you the select the fb the library will be added by placeholder to
the librarymanager.
BR
Edwin
Works fine :-)