CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum by 3S-Smart Software Solutions GmbH | A member of the CODESYS Group
Deutsche Version English version russian version 
It is currently Tue Apr 23, 2019 2:56 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Wed Jan 16, 2019 10:37 pm 
Offline

Joined: Wed Jan 16, 2019 12:27 am
Posts: 2
Hello

I would need some help to use the KNX SL feature on a Raspberry Pi 3B+.
License of CODESYS Control for Raspberry Pi SL and CODESYS KNX SL was installed on a CODESYS Runtime Key.
I’m on : Raspberry Pi 3B+ with Codesys 3.5.14.0
ETS 5.6.6 (Build 1190) with DCACodeSys 1.0.0.0 installed.

Do you have an example of a project using CODESYS KNX? (Codesys Project + ETS Project)

For the moment, even with the installation of DCACodesys, I don't understand how to add a Codesys Device in my ETS project, do not I need a KNXProd file to be able to add the device to my catalog.
Would not it be necessary to import a KNXProd file to my catalog ?

In ETS, I can see a Line "3S-Smart Software Solutions GmbH" in the Online Catalog Settings Tabs.
But in the Catalogs Tabs, there is nothing ?

Next In codesys how can I use KNX ?

Thanks.


You do not have the required permissions to view the files attached to this post.


Last edited by pflot59 on Fri Jan 18, 2019 12:24 am, edited 1 time in total.

Top
   
 Post subject: Re: KNX SL - HOWTO
PostPosted: Thu Jan 17, 2019 1:20 am 
Offline

Joined: Thu Dec 27, 2018 6:04 pm
Posts: 3
https://forum-de.codesys.com/viewtopic. ... 7&start=30


Top
   
PostPosted: Fri Jan 18, 2019 12:59 am 
Offline

Joined: Wed Jan 16, 2019 12:27 am
Posts: 2
Thanks for your link even if it's in german :oops:

I notice there are some diff between Codesys 3.5.13 and 3.5.14.

In the KNX device tab, I can't see the General Tabs in Codesys 3.5.14 , instead of the Gneral Tab, there is a KNX Parameters Tab instead.
So how do you create a point?

See my file capture.

For the moment I switch to Codesys 3.5.13 and It's OK.

The process for using the KNX is similar to that used by wago and their terminal 753-643

On the other hand I find the process of "download Application" in ETS extremely long.
I hope you could improve this.


You do not have the required permissions to view the files attached to this post.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited