CODESYS - the IEC 61131-3 automation software
https://forum.codesys.com/

CAN-TCP gateway USR-CANET200
https://forum.codesys.com/viewtopic.php?f=2&t=9857
Page 1 of 1

Author:  fleaplc [ Fri Jul 05, 2019 9:10 pm ]
Post subject:  CAN-TCP gateway USR-CANET200

I'm trying to use a can-tcp gateway model USR-CANET200 (https://www.usriot.com/products/can-to- ... erter.html) for programming Epec 3724 ECU from Codesys 2.3 but still not able to do it!
By USB-can interface I use these settings and everything is fine
Attachment:
USB-CAn.png


with the TCP-CAN I've tried this but no way.. (note Can side I think is working: I see for led blinking. So I'm in doubt about TCP side especially which TCP port to use with Codesys and Epec..)
Attachment:
TCP-CAn.png

every suggestion is highly appreciated

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/