fleaplc - 2019-07-05

I'm trying to use a can-tcp gateway model USR-CANET200 (https://www.usriot.com/products/can-to- ... erter.html) for programming Epec 3724 ECU from Codesys 2.3 but still not able to do it!
By USB-can interface I use these settings and everything is fine

with the TCP-CAN I've tried this but no way.. (note Can side I think is working: I see for led blinking. So I'm in doubt about TCP side especially which TCP port to use with Codesys and Epec..)

every suggestion is highly appreciated

IMG: USB

IMG: TCP