Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I have an application with 4 Yaskawa V7 Drives that have to communicate via Modbus (Wago Serial Interface Module, RS485) to the PLC. Also, a Red Lion Interface to communicate to the PLC via Ethernet with options of Modbus (Master or Slave). I don't have any experience with Modbus and need help desperately. Does anyone have documented sample files of CoDeSys for my application that will help me understand how all of this works? I have the hardware and a single Drive in-house for testing. Thanks in advance for any assistance.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Originally created by: mpcontrols
I have an application with 4 Yaskawa V7 Drives that have to communicate via Modbus (Wago Serial Interface Module, RS485) to the PLC. Also, a Red Lion Interface to communicate to the PLC via Ethernet with options of Modbus (Master or Slave). I don't have any experience with Modbus and need help desperately. Does anyone have documented sample files of CoDeSys for my application that will help me understand how all of this works? I have the hardware and a single Drive in-house for testing. Thanks in advance for any assistance.
Please have a look the the WAGO application notes on
http://www.wago.com/wagoweb/documentati ... w____e.htm
Select the "Total overview" and search with Ctrl-F to "modbus".
You will find several application samples how to connect Modbus devices.