Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I'm new on Codesys so I wonder if there's some configuration to apply in order to storage data, I mean, historical data. I would like to save temperature values (3 or 6 months), but I don't know how to export this or how to record this information. I'm using SmartPLC DataLine, an IFM PLC with an embedded webserver. Hope someone could give me some guidelines or an accurate orientation.
Thanks in advance
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi everyone!
I'm new on Codesys so I wonder if there's some configuration to apply in order to storage data, I mean, historical data. I would like to save temperature values (3 or 6 months), but I don't know how to export this or how to record this information. I'm using SmartPLC DataLine, an IFM PLC with an embedded webserver. Hope someone could give me some guidelines or an accurate orientation.
Thanks in advance
Hello.
There are many solutions to solve your request. I've linked to a CSV datalogger below.
Try this: https://store.codesys.com/oscat-network ... re=default
Support here:
http://www.oscat.de/community/index.php/board,14.0.html
It is a free library with a data logger that writes a .csv file.
Best regards
Peter
Sendt fra min CLT-L29 med Tapatalk
Thanks! I'll check it out