Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
hi,
the problem on this is:
Beckhoff OPC is not a CODESYS product made by 3S,
this is made by Beckhoff.
So I would recommend to ask the Beckhoff support for help.
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear All;
I have a BECKHOFF OPC Server and 13 slave module.
Some slave module write to screen below message.
TwinCAT System Service
Message queue to TwinCAT System Service not available, therefore dynamic status update not possible. Enable polling mode instead?
I select OK but not running..
What Am I doing?
Do you hava got any idea?
hi,
the problem on this is:
Beckhoff OPC is not a CODESYS product made by 3S,
this is made by Beckhoff.
So I would recommend to ask the Beckhoff support for help.
BR
Edwin