Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi all.
I am trying to get OPC communication to work between FSGateway from Wonderware Intouch 2012 (v10.5).
The FSGateway disgnostics indicates all variable names from the OPC-server but it can not read/write values to it.
The FSGateway indicates no errors.
FSGateway supports OPC DA 2.05A while CoDeSys OPC-server supports OPC 2.0?
In previous projects I used OPClink from Wonderware but this program is superseeded by FSGateway.
I suspect the CoDeSys OPC-server to be incompatible with FSGateway
Anybody have any knowledge about this?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all.
I am trying to get OPC communication to work between FSGateway from Wonderware Intouch 2012 (v10.5).
The FSGateway disgnostics indicates all variable names from the OPC-server but it can not read/write values to it.
The FSGateway indicates no errors.
FSGateway supports OPC DA 2.05A while CoDeSys OPC-server supports OPC 2.0?
In previous projects I used OPClink from Wonderware but this program is superseeded by FSGateway.
I suspect the CoDeSys OPC-server to be incompatible with FSGateway
Anybody have any knowledge about this?