Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi all,
I have a Simatic HMI KTP600, i want to use it for display the visualization of codesys but i don't know how to do and where to learn. Please give me some advise.
Thanks!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all,
I have a Simatic HMI KTP600, i want to use it for display the visualization of codesys but i don't know how to do and where to learn. Please give me some advise.
Thanks!
Just put a webview into your KP and point the location to the codesys plc visu.
Sorry i'm new here, how can i put the webview into KP.
To program you KP, you first need TIA Portal (siemens software for programming their hardware).
I used to work with tia portal but haven't heard about webview before. I'll try to read some document. Thanks for your help.
This may help then :
https://support.industry.siemens.com/tf/WW/en/posts/tip-wincc-v13-sp1-and-web-browser-control/120166?page=0
Edit : Forgot to precise it's not a KTP basic feature
Thanks. It help me a lot.