Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
at this moment Im programming a Berghof DC2007 PLC with codesys 3.5 sp11 p 4
i have configured three Ethercat slaves, Everything works fine, But
How can I get information of the status of the slaves , like pre operational , operational e.d
wich library do I have to Use ?
Hopefully somebody can help me any further with this isue
kind regards Merlijn
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello Everyone
at this moment Im programming a Berghof DC2007 PLC with codesys 3.5 sp11 p 4
i have configured three Ethercat slaves, Everything works fine, But
How can I get information of the status of the slaves , like pre operational , operational e.d
wich library do I have to Use ?
Hopefully somebody can help me any further with this isue
kind regards Merlijn
Hi,
see the online help here:
https://help.codesys.com/webapp/_ecat_l ... n=3.5.11.0
Cheers
plcmax
Hello PLC MAX
thanks for your reaction, it works for me
Didn not thought to look in the online help.
kind regards Merlijn