Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I want to open a Codesys V2.3 project in Codesys V3.5 SP12.
Normally this should be possible by selecting open project and selecting Codesys project files (before V3.5). But this option is not possible in my case.
Hi,
the Import is only available in the 32Bit Version of CODESYS.
You need to download the 32Bit Version from CODESYS Store (could be used both on the same System)
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello
I want to open a Codesys V2.3 project in Codesys V3.5 SP12.
Normally this should be possible by selecting open project and selecting Codesys project files (before V3.5). But this option is not possible in my case.
I can only chose between.
All supported files
Project files (.project)
Project archive files (.projectarchive)
Library files (*.library)
Can someone help me?
Hi,
the Import is only available in the 32Bit Version of CODESYS.
You need to download the 32Bit Version from CODESYS Store (could be used both on the same System)
BR
Edwin