Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Can anyone help me with the diagnostics of the ethercat network, because I have some errors on it and I do not know where it is, another problem I get cards in error not all the time and every turn
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
strange seems that you are loosing frames... this might be the reason.
-check wiring?
-remove slaves tills this problems disapear ( you could set parts in the device tree as optional or disable them)
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Can anyone help me with the diagnostics of the ethercat network, because I have some errors on it and I do not know where it is, another problem I get cards in error not all the time and every turn
Hi,
strange seems that you are loosing frames... this might be the reason.
-check wiring?
-remove slaves tills this problems disapear ( you could set parts in the device tree as optional or disable them)
BR
Edwin