Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi every body this program write whit ST(LANGUAGE) Pls change to Lader Language thank you best regard
IF (SW_Aerial_Maneuver_Active=FALSE AND cage_active)OR turret_active THEN
Valve_cage_leveling_down:=0;
Valve_cage_movement:=0;
IF Deadman THEN
Valve_Main:=1;
IF Valve_Boom_up OR Boom_Down_Inctive OR (Stop2 OR Stop1 AND Propertional_valve=Propertional_Val_Min) OR(ERROR AND (Boom_Length>=5800 OR SW_By_Pass=FALSE )) THEN (add Stop1&Stop2)
Valve_boom_down:=0;
ELSE
Valve_boom_down:=boom_down;
END_IF
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
-
2017-09-13
Originally created by: rickj
Something like this I suppose
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi every body this program write whit ST(LANGUAGE) Pls change to Lader Language thank you best regard
IF (SW_Aerial_Maneuver_Active=FALSE AND cage_active)OR turret_active THEN
Valve_cage_leveling_down:=0;
Valve_cage_movement:=0;
IF Deadman THEN
Valve_Main:=1;
IF Valve_Boom_up OR Boom_Down_Inctive OR (Stop2 OR Stop1 AND Propertional_valve=Propertional_Val_Min) OR(ERROR AND (Boom_Length>=5800 OR SW_By_Pass=FALSE )) THEN (add Stop1&Stop2)
Valve_boom_down:=0;
ELSE
Valve_boom_down:=boom_down;
END_IF
Originally created by: rickj
Something like this I suppose